型號:
SC12864032-V02Resolution:
128*64Outline Dimension (mm):
71.0*51.8*5.3Viewing Area (mm):
65.5*38.0Interface:
-Driver IC:
ST7565RBacklight:
White LEDPIN:
36SC12864032-V02 is a Graphic LCD Display with 128*64 resolution, it built in with ST7565R-G-1 IC, 36 PIN, 6 o'clock View direction.
Drawing
General Specification
ITEM | STANDARD VALUE | UNIT |
NUMBER OF GRAPHIC | 128×64 | Mm |
MODULE DIMENSION | 71.0×51.8×8.5 | Mm |
VIEWING AREA | 60.77×32.93 | Mm |
DOT SIZE | 0.45×0.49 | Mm |
DOT PITCH |
0.476×0.515 |
Mm |
LCD TYPE | STN/YELLOW-GREEN/POSITIVE/TRANSMISSIVE |
|
DUTY | 1/64 |
|
VIEWING DIRECTION | 6 | o'clock |
BACK LIGHT TYPE | SIDE LIT LED |
|
BACK LIGHT COLOR | WHITE |
|
APPROX. WEIGHT | TBD | G |
Interface Definition
NO | SYMBOL | LEVEL | FUNCTION |
1--2 | NC | - | No used |
3 | CS1 | H/L | Chip select signal |
4 | RST | H/L | Chip reset signal |
5 | A0 | H/L |
Register selection input H : Indicate that D0 to D7 are display data. L:Indicate that D0 to D7 are control data |
6 | WR(R/W) | H/L |
8080 series: Write signal 6800 series: Read or Write signal |
7 | RD(E) | H/L |
8080 series: Read signal 6800 series: Enable signal |
8--15 |
|
|
This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus. When the serial interface (SPI-4) is selected (P/S = "L") : D7 : serial data input (SI) ; D6 : the serial clock input (SCL). D0 to D5 should be connected to VDD or floating. |
16 | VDD | -- | Supply voltage for logic |
17 | VSS | -- | Ground |
18 | VOUT | -- | Power for LCD |
19 | C3+ | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. |
20 | C1- | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1P terminal. |
21 | C1+ | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. Reset signal. |
22 | C2+ | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal. |
23 | C2- | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2P terminal. Chip select. |
24 | NC | - | No used |
25-29 | V4-V0 | -- | This is a multi-level power supply for the liquid crystal drive. |
30 | VR | -- | Contrast adjustment input. |
31 | NC | - | No used |
32 | C86 | H/L |
C86 = "H": 6800 Series MPU interface. C86 = "L": 8080 Series MPU interface. |
33 | PS | H/L |
P/S = "H": Parallel interface P/S = "L": Serial interface |
34 | NC | - | No used |
35 | IRS | H/L |
RS = "H": Use the internal resistors IRS = "L": Do not use the internal resistors. |
36 | NC | - | No used |