型號:
SC12864028-V02Resolution:
128*64Outline Dimension (mm):
71.0*51.8*6.8Viewing Area (mm):
65.5*38.0Interface:
-Driver IC:
ST7565RBacklight:
White LEDPIN:
30SC12864028-V02 is a Graphic LCD Display with 128*64 resolution, it built in with ST7565R-G-1 IC, 30 PIN, 6 o'clock View direction.
Drawing
General Specification
ITEM | STANDARD VALUE | UNIT |
NUMBER OF GRAPHIC | 128×64 | Mm |
MODULE DIMENSION |
71.00*51.80*6.80 |
Mm |
EFFECTIVE DISPLAY AREA | 60.77×32.93 | Mm |
DOT SIZE | 0.45×0.49 | Mm |
DOT PITCH | 0.476×0.515 | Mm |
LCD TYPE | FSTN/POSITIVE/TRANSMISSIVE |
|
DUTY | 1/64 |
|
VIEWING DIRECTION | 6 | o'clock |
BACK LIGHT TYPE | SIDE LIT LED |
|
BACK LIGHT COLOR | WHITE |
|
APPROX. WEIGHT | 85 | G |
Interface Definition
Pin No. | Symbol | Level | Description |
1 | CS1 | H/L | Chip select signal |
2 | RST | H/L | Chip reset signal |
3 | A0 | H/L |
Register selection input H : Indicate that D0 to D7 are display data. L:Indicate that D0 to D7 are control data |
4 | WR(R/W) | H/L |
8080 series: Write signal 6800 series: Read or Write signal |
5 | RD(E) | H/L |
8080 series: Read signal 6800 series: Enable signal |
6--13 |
D0-D5 D6(SCL) D7(SI) |
H/L |
This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus. When the serial interface (SPI-4) is selected (P/S = "L") : D7 : serial data input (SI) ; D6 : the serial clock input (SCL). D0 to D5 should be connected to VDD or floating. |
14 | VDD | -- | Supply voltage for logic |
15 | VSS | -- | Ground |
16 | VOUT | -- | Power for LCD |
17 | C3+ | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. |
18 | C1- | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1P terminal. |
19 | C1+ | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal. Reset signal. |
20 | C2+ | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal. |
21 | C2- | -- |
DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2P terminal. Chip select. |
22-26 | V4-V0 | -- | This is a multi-level power supply for the liquid crystal drive. |
27 | VR | -- | Contrast adjustment input. |
28 | C86 | H/L |
C86 = "H": 6800 Series MPU interface. C86 = "L": 8080 Series MPU interface. |
29 | PS | H/L |
P/S = "H": Parallel interface P/S = "L": Serial interface |
30 | IRS | H/L |
RS = "H": Use the internal resistors IRS = "L": Do not use the internal resistors. |